Rex Specs Small Wide Goggle Fit Guide: Odd Head Shapes
By Rex Specs | Published: 2026-11-02
Category: Buying Guides
Learn how to decide if the Rex Specs Small Wide Goggle fits your short-nosed, wide-faced dog, with clear sizing rules and honest trade-offs.
Quick answer
Choose the Rex Specs Small Wide Goggle if your dog has a short nose and a wide, flat face—like a French Bulldog or Pug—and still has about 1 inch of nose length. If your dog’s nose is shorter than that, or the face is narrow rather than wide, this shape is likely the wrong starting point.
Why a standard goggle shape can miss on a wide, flat face
Most dog goggles assume a longer muzzle and a narrower head. On a short-nosed, wide-faced dog, that geometry can push the frame off-center or leave gaps around the eyes. The Small Wide Goggle changes the shape to sit better on that face type, but it still depends on one key measurement: about an inch of nose. That requirement is the line between a workable fit and a goggle that will not stay put.
The trade-off: shape helps, but it is not a universal fix
A wide frame can improve stability on flat faces, but it will not make a very short nose longer. If your dog has almost no muzzle, the goggle may not have enough real estate to anchor safely. Likewise, a dog with a wide head but a longer, narrower snout may do better in a standard shape. Treat the Small Wide Goggle as a targeted solution for a specific face type, not a catch-all upgrade.
Decision rules for the Small Wide Goggle
- Measure nose length first: Measure from the tip of the nose back along the top of the muzzle. If you get about 1 inch or more, continue. If it is clearly shorter, stop here—this goggle is not designed for that nose length. A nose shorter than about 1 inch is a disqualifier for this shape, regardless of how wide the face is.
- Confirm the face is wide and flat: Look at the head from above. A French Bulldog or Pug profile—broad across the cheeks and flat across the front—is the target. A narrow or tapered muzzle points you toward a standard goggle instead. Wide and flat is the shape this goggle was built for; wide but narrow-snouted is not.
- Check stability, not just fit: With the goggle on, gently test whether the frame shifts when your dog shakes their head or walks. If it slides or lifts easily, the shape is not anchoring well. Do not force it—try a different size or contact support. A goggle that moves on a shake is not secure enough for active use.
- Ask support when you are between rules: If your dog has about 1 inch of nose but a head that is not clearly wide or flat, contact Rex Specs customer support via chat or email at [email protected] before ordering. They can help you decide between this goggle and a standard shape. Borderline cases are worth a quick message rather than a guess.
Product facts
- Small Wide Goggle: Designed for dogs with a short nose and wide, flat face, such as a French Bulldog or Pug. This shape is intended for that specific head type, so it is the right first candidate only if your dog matches it.
Small Wide Goggle - Small Wide Goggle: Dogs that fit this goggle still need a nose about 1 inch in length. If your dog’s nose is shorter, the goggle may not have enough purchase to stay secure, even if the face is wide.
Who the Small Wide Goggle is for
Best for
- Dogs with a short nose and a wide, flat face, such as French Bulldogs or Pugs, that still have about 1 inch of nose length
- Owners who need a goggle shape built for a broad head rather than a long muzzle
Not for
- Dogs with less than about 1 inch of nose length
- Dogs with a wide head but a narrow or tapered snout
- Dogs whose face shape is borderline and who have not been fitted or advised by support
